Technical FAQs

Ask a Question

Is there any method to Remotly reset the Thermal overload Relays "D" and "F" (not using the local reset button) ?

There are 3 different options we can offered for the reset of the Tesys LRD overload relay other than the direct pressing of Reset key mounted on the product

1. you  can choose Auto reset function , that can avoid the manual reset everytime the product goes in fault state.

2. you  can use Remote Reset function control with has a push button mounted on the panel door and the reset device on the LRD / LR9F relay the connection is via Flexible cable 0.5 metre long.

- LAD7305 is applicable for LRD01 to 35 , LR3D01 to LR3D35 & LRD313 to LRD365

- LA7D305 is applicable for Tesys LRD range not covered above and all LR9F Relays.

3. Remote stop or Electrical reset devices , that are mounted on the LRD/ LR9F relays and can stop or reset the relay with a voltage pulse based on the selected coil.

- LAD703* for LRD01 to 35 , LR3D01 to LR3D35 & LRD313 to LRD365

-LA7D03* is applicable for Tesys LRD range not covered above and all LR9F Relays
Was this helpful?
What can we do to improve the information ?