Technical FAQs

Ask a Question

What are the functions available to the user with Micrologic NSX RSU software?

RSU (Remote Setting Utility) is a configuration software. It is compliant with all Micrologic trip units mounted on Compact NSX or Powerpact circuit breakers. RSU enables the user to:

Check and set up the Micrologic trip unit parameters:
The protection parameters
The measurement parameters
The alarm parameters
Check and set up the SDx module output parameters
Check the SDTAM module output parameters
Check and set up the BSCM (Breaker Status and Control Module) parameters
Check and set up the Modbus communication interface module parameters
Modify passwords in the IMU (Intelligent Modular Unit)
Edit and save configurations
Display the tripping curves
Change IMU (Intelligent Modular Unit) identification
Get and set the time
Update the ULP (Universal Logic Plug) modules firmware (only with the Schneider Service user profile.
Reset the passwords to their default values (only with the Schneider Service user profile.

The software is available on www.schneider-electric.com:

http://www.schneider-electric.com/products/ww/en/4200-power-circuit-breakers-switches/4230-molded-case-circuit-breaker/1887-compact-nsx-630a/?p_url=http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do%3fel_typ=product%26cat_id=BU_POW_1887_L3_1%26prd_id=LV4ST121%26scp_id=Z000%26xtmc=LV4ST121%26xtcr=1

Press " Documents & Downloads " and choose ( RSU (Remote Setting Utility) - Compact NSX ).
Was this helpful?
What can we do to improve the information ?