Technical FAQs

Ask a Question

We now have a project with QP for upgrading IONE to PME 7.2. We are in the process of Server and Client hardware selection. I have attached the data sheet. Kindly can you confirm that the hardware configuration which has been selected by us is appropriate or we have to do some changes in configuration. Kindly provide us your valuable inputs. Dear Team, ION Enterprise 6.0 is being used. Thanks & Regards,

Actually PowerMonitoring Expert Software can vary in size from just a few devices with limited logging to thousands of devices with extensive logging and custom applications so the hardware requirement will depend on different factors for Example 

• Used Architecture type (Server and Clint) 
• Number of devices will be connected to PME 
• Number of Users 
• Years of Logging 
• Number of OPC tags 

I put in the attachment useful documents will help you for better choice for your Server and Required SQL version. 

Also I recommend to take look on PME 7.2 User Desgin Guide 

http://www.schneider-electric.com/ww/en/download/document/7EN02-0330-00?showAsIframe=true&xtmc=StruxureWare%2520Power%2520Monitoring%2520Expert%25207.2%2520System%2520Design%2520Guide%2520-%2520EN&xtcr=1 


In the Same time I put other documents which will provide an appropriate set of procedures that will enable the project execution teams to perform the configuration transfer of an existing ION EnterpriseTM 6.0.1 system to a newly installed Power Monitoring Expert 7.2 in a predictable and cost effective manner. 
Was this helpful?
What can we do to improve the information ?