Technical FAQs

Ask a Question

VARIO switch-disconnectors with specs 6 Poles and 80 A with enclosure to insure the IP degree of protection

We suggest using Quantity one reference V4 (HxWxD: 83x60x65) + Quantity three reference VZ4 (HxWxD: 83x20x46)
So the total dimension will be : HxWxD: 83x120x65 mm.
One of the suitable enclosures/junction-boxes can be P/N NSYDB2520M. It has knock-outs for drill holes.
You could also choose shaft P/N VZ18 and cut it to the length that he desires as well as P/N KAF2PZ (handle).
The constituents of P/N KAF2PZ is shown in the attached document (refer to KAF2PZ constituents.pdf).

Here is the datsheet for the mentioned products :
V4, TeSys VARIO - Switch body for switch-disconnector  - 3 poles - 80 A
http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do?cat_id=BU_CHA_OEM_C3_63058_L3&el_typ=product&nod_id=0000000004&prd_id=V4

VZ4, TeSys VARIO - additional pole - 80 A - for V4
http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do?cat_id=BU_POW_624_L3&el_typ=product&nod_id=0000000007&prd_id=VZ4

NSYDB2520M, Metal industrial cut-out box - low plain cover - H256xW206xD93 - IP55 - grey
http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do?cat_id=BU_AUT_5776_L3&el_typ=product&nod_id=0000000007&prd_id=NSYDB2520M

VZ18, TeSys VARIO - shaft extension - for V3 / V4 / V5 / V6
http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do?cat_id=BU_CHA_OEM_C3_63058_L3&el_typ=product&nod_id=0000000006&prd_id=VZ18

KAF2PZ, TeSys VARIO - front and black rotary handle - 1 to 3 padlocking
http://www.ops-ecat.schneider-electric.com/ecatalogue/browse.do?cat_id=BU_CHA_OEM_C3_63058_L3&el_typ=product&nod_id=0000000005&prd_id=KAF2PZ
 
Was this helpful?
What can we do to improve the information ?